bal.4 spike earth connection | IP44.DE outside lighting

bal.4 spike earth connection new

The ground spike luminaire for direct connection to an on site underground cable – bal.4 spike earth connection makes a real statement! It combines an elegant sphere of black high-gloss powder-coated aluminium and smoked glass with a fine ground spike, and creates warm light islands.

Storefinder

Share

bal.4 spike deep black earth connection

Its perfect all-round light is scattered downwards by a diffuser.

Impressions

Technical data

light technology	light direction	installation	material	protection class
230V Power LED L70/50.000 h dimmable via trailing edge dimmer luminaire cable can be shortened on request		for direct connection to on site underground cable: 3 m luminaire cable (05RN8-F 3G1,0 mm²) incl. connect plug + 2 m earth connection cable incl. aquastop + open cable end assembly for unpaved beds and greens	aluminium powder-coated smoked glass polycarbonate	IP65

light technology

light direction

installation

material

protection class

230V Power LED

L70/50.000 h

dimmable via trailing edge dimmer

luminaire cable can be shortened on request

for direct connection to on site underground cable: 3 m luminaire cable (05RN8-F 3G1,0 mm²) incl. connect plug + 2 m earth connection cable incl. aquastop + open cable end

assembly

for unpaved beds and greens

aluminium powder-coated

smoked glass

polycarbonate

IP65

bal.4 spike earth connection
dimensions in mm	colour	item no.	system performance	colour temperature
dimensions in mm	deep black RAL 9005	93057-BL-EC	4 W/155 lm	2700K

earth distribution box installation: 7x cable entry point; connection terminal 5x 2,5 mm²
dimensions in mm	item no.	protection class
dimensions in mm	55380	IP68

Downloads

bal.4 spike earth connection Produktdatenblatt Data sheet pdf 651.31 KB bal.4 spike earth connection . Gebrauchsanweisung Instructions for use pdf 552.82 KB bal.4 spike earth connection EU-Energielabel EU-Energy label zip 47.19 KB bal.4 spike earth connection EULUMDAT EULUMDAT ldt 37.25 KB

Caring & Useful information

Our luminaires have been designed to do their job for many years. But we need a little help from you to make sure that they don't lose their looks as the years go by and that they will continue to bring you pleasure for a long time! Please clean your IP44.DE luminaires regularly. And please also remember that every material and every environment needs a different kind of care. To protect the threads of the luminaire bodies from galvanic corrosion, we recommend treating them with a grease-based paste that is suitable for outdoor use and that provides protection against corrosion after approximately 10 years. Please contact us if you require further information.

Application areas

It’s fabulous to have a house on the coast. But the salty air in coastal areas is a real challenge for aluminium. Our luminaires are therefore always designed to withstand salty air even in the long term. Furthermore, we now also offer some IP44.DE models with a coastal grade finish, which makes them extraordinarily corrosion resistant (please consult us for all other models). How do we know that? Because all models with a coastal-grade finish go through a real endurance test in a testing lab. In the salt spray test according to the standard DIN EN ISO 9227, they are sprayed with a saline solution at 35° Celsius in a test chamber for 2,000 hours. This proves that they really are ready for the coast.

Condensation

High humidity levels or great fluctuations in temperature, climatic conditions which normally occur in spring and autumn, can cause condensation in the glass housing. This does not indicate a flaw in the product but is a natural consequence of the physical properties of water. The best way to deal with condensation is simply to leave the luminaire switched on for a while so that the condensation can dry out.

Caring for powder-coating

The luminaires have a powder-coated finish that offers high chemical and mechanical resistance. As with every surface, the colour shade of our powder-coated surfaces can also be changed when exposed to UV radiation (e.g. sunlight). Exposure to UV light can cause changes to the colour pigments embedded in the powder coating. A gentle, solvent-free household cleaner is all that's needed to care for the luminaire, which should then be rubbed off with a dry, soft cloth. Abrasive cleaners, steel wool, scouring pads, acids or alkali cleaning agents should not be used as these would damage the surface.