cut control

A luminaire offering security and aesthetics all in one: cut control features an integrated motion detector and has the same proportions as the cut up and downlight for a perfect pairing.

Storefinder

Share

cut control

A luminaire offering security and aesthetics all in one: cut control features an integrated motion detector and has the same proportions as the cut up and downlight for a perfect pairing.

Storefinder

Share

cut control

A luminaire offering security and aesthetics all in one: cut control features an integrated motion detector and has the same proportions as the cut up and downlight for a perfect pairing.

Storefinder

Share

cut control

A luminaire offering security and aesthetics all in one: cut control features an integrated motion detector and has the same proportions as the cut up and downlight for a perfect pairing.

Storefinder

Share

cut control anthracite

The sensor–controlled motion detector has a precise mirror lens to register everything moving within 120° in a range of 9 m. It is possible to set the dimming degree and the turn-on-time.

Data sheet

cut control deep black

The sensor–controlled motion detector has a precise mirror lens to register everything moving within 120° in a range of 9 m. It is possible to set the dimming degree and the turn-on-time.

Data sheet

cut control pure white

The sensor–controlled motion detector has a precise mirror lens to register everything moving within 120° in a range of 9 m. It is possible to set the dimming degree and the turn-on-time.

Data sheet

cut control space grey

The sensor–controlled motion detector has a precise mirror lens to register everything moving within 120° in a range of 9 m. It is possible to set the dimming degree and the turn-on-time.

Data sheet

A luminaire offering security and aesthetics all in one: cut control features an integrated motion detector and has the same proportions as the cut up and downlight for a perfect pairing.

anthracite deep black pure white space grey

Impressions

Technical data

light technology	light direction	installation	material	protection class
230V Power LED L70/50.000 h reflector: flood integrated motion detector detection angle 120° time setting 5 sec. - 8 min. twilight setting 10-2000 lux range 9 m		2x cable entry point; connection terminal 4x 1,5 mm²	aluminium die-casting powder-coated safety glass clear	IP44

light technology

light direction

installation

material

protection class

230V Power LED

L70/50.000 h

reflector: flood

integrated motion detector

detection angle 120°
time setting 5 sec. - 8 min.
twilight setting 10-2000 lux
range 9 m

2x cable entry point; connection terminal 4x 1,5 mm²

aluminium die-casting powder-coated

safety glass clear

IP44

cut control
colour	item no.	system performance	colour temperature
anthracite RAL 7016	91190-27-AN	16 W/1118 lm	2700K
deep black RAL 9005	91190-27-BL	16 W/1118 lm	2700K
pure white RAL 9016	91190-27-WH	16 W/1118 lm	2700K
space grey	91190-27-SG	16 W/1118 lm	2700K

Downloads

cut control Produktdatenblatt Data sheet pdf 713.96 KB cut control Gebrauchsanweisung Instructions for use pdf 796.45 KB cut control Bohrschablone Drilling jig pdf 40.96 KB cut control Technische Zeichnung Technical drawing pdf 45.23 KB cut control EU-Energielabel EU-Energy label zip 461.43 KB cut control EULUMDAT EULUMDAT ldt 20.13 KB

Caring & Useful information

Our luminaires have been designed to do their job for many years. But we need a little help from you to make sure that they don't lose their looks as the years go by and that they will continue to bring you pleasure for a long time! Please clean your IP44.DE luminaires regularly. And please also remember that every material and every environment needs a different kind of care. To protect the threads of the luminaire bodies from galvanic corrosion, we recommend treating them with a grease-based paste that is suitable for outdoor use and that provides protection against corrosion after approximately 10 years. Please contact us if you require further information.

Application areas

It’s fabulous to have a house on the coast. But the salty air in coastal areas is a real challenge for aluminium. Our luminaires are therefore always designed to withstand salty air even in the long term. Furthermore, we now also offer some IP44.DE models with a coastal grade finish, which makes them extraordinarily corrosion resistant (please consult us for all other models). How do we know that? Because all models with a coastal-grade finish go through a real endurance test in a testing lab. In the salt spray test according to the standard DIN EN ISO 9227, they are sprayed with a saline solution at 35° Celsius in a test chamber for 1,000 hours. This proves that they really are ready for the coast.

Caring for powder-coating

The luminaires have a powder-coated finish that offers high chemical and mechanical resistance. As with every surface, the colour shade of our powder-coated surfaces can also be changed when exposed to UV radiation (e.g. sunlight). Exposure to UV light can cause changes to the colour pigments embedded in the powder coating. A gentle, solvent-free household cleaner is all that's needed to care for the luminaire, which should then be rubbed off with a dry, soft cloth. Abrasive cleaners, steel wool, scouring pads, acids or alkali cleaning agents should not be used as these would damage the surface.

cut control

cut control

cut control

cut control

cut control anthracite

cut control deep black

cut control pure white

cut control space grey

Impressions

Technical data

Downloads

Caring & Useful information

Application areas

Caring for powder-coating

Related topics